ECOBIK® APPLICATION EXAMPLES
CLASSIC VARIANT
First generation – universal – usable for any application
- Continuous treatment of combustion air; continuously produced aerosols; dosage and composition of additives depending on the composition of the fuel, the load and the composition of the combustion equipment
- Dedicated chemical systems, made up for each type (or mixture) of fuel
- Individualized settings for the chemical system
- Customizable equipment for each combustion equipment
EXAMPLES OF EFFECTS FOR FIRST GENERATION – HEAVY LIQUID FUEL
SKODA TLMACE BOILERS – 525 t/h, 150 bar, 540°C – 2,000 HOURS
AH Comb
Economizer
Support SH (pure sulfur – S8)
First generation of Ecobik®
RESULTS
%
Heat savings
%
Increase overall yield
%
Reduction of Sox emissions
%
Reduction of Nox
EXAMPLES OF EFFECTS FOR FIRST GENERATION – HEAVY LIQUID FUEL – IGNITUBULAR BOILERS – 2,000 HOURS
SECOND GENERATION
Coal boilers
- Continuous treatment of combustion air and / or combustion air-dust mixture with solutions of one or several additives, by continuous injection of very fine dispersion liquid;
- Maximum dosage of 1 ppm total additives (relative to the fuels expressed in conventional fuel mass)
- Additive composition depending on the composition of the fuels and the load of the combustion equipment
Principle drawing
Standard equipment
CET – Giurgiu
Jefferries Power – SC – USA
- Allows operation with subunit λ (air excess) in the fire room and approx. stoichiometric over SH area
- Uses one or more units or in parallel with First Generation equipment
- Keeps AH (air heaters) and ESP (electrostatic precipitators) in perfect condition, does not allow the accumulation of ash deposits and protects against corrosion